24 Hour Garage Door Repair in Conroe
URL Conroe-Garage Door Fix
Your garage door repair in Conroe is just around the corner. But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis. Cleaning your garage door more or track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.
For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.
Top reasons why you need garage door repair. This is part of a continuing series.
2. Your Photo Eye Is out of Alignment
You may remember a time as a kid when you and your siblings would close the garage door and run underneath it as fast as possible to make it out before the door closed. Well, on any garage door installed after 1993, that’s no longer possible thanks to two tiny photo eyes on either side of the garage entrance. These photo eyes transmit an invisible beam between each other that detects if anything is in the garage door’s path when it closes. This safety measure is there to prevent automatic garage doors from closing on top of someone or something and causing serious injury or damage to property.
If you notice that the garage door opens normally but doesn’t make any attempt to close when the remote is pressed, the first thing you’ll want to do is visually inspect the photo eyes. Over time, these eyes can get dirty, causing the light from the beam to be blocked. They also can eventually become misaligned, causing the eyes to not match up on both sides.
When cleaning the photo eye, you should take care not to scratch or damage the eye since it’s made of glass, similar to that of a camera lens. The photo eye itself is pretty small, only a few centimeters in diameter, but it can get dirty rather easily. To clean it, you’ll need a soft cloth and a mild, streak-free cleaner. Gently wipe away any dirt or residue that has built up on the eye and be careful not to over saturate as excessive wetness can cause dirt to stick to the eye more quickly.
If your photo eyes are clean and the door still isn’t closing, the next thing you’ll need to do is check the alignment of the eyes. The eyes should be pointing in exactly the same direction and at the same angle. If they’re off, they won’t register that the other one is there, and it’ll assume something is in its path, causing the door to stay in the open position. When checking the alignment, measure the height of each photo eye from the ground. Use a level to make sure they’re pointing directly across at each other at the same angle. A laser level will make this part a little easier, but if you don’t have one, a regular level will work as well.
Once you have the eyes cleaned and aligned, test your door to make sure it opens and closes normally. If you’re still experiencing issues with the photo eyes, it may be time to call the professionals to come out and diagnose the problem.
In Conroe go with the best for garage door repair
Sticking garage doors can be caused by a few issues. If you have a remote garage opener, check batteries, sensors and switches first. If you open the garage door manually, check for obstructions in the wheel track first.Different weather conditions and temperatures can affect the lubricant. Using more of a proper type may help sticking doors. One of the major causes of stuck garage doors is that they are hung unevenly. Make sure all the cables and springs that hold them are even length and have the same springiness from side to side.
The Door Moves Unevenly and Shimmies Side to Side
The easiest way to solve and unevenly opening garage door is by removing an obstruction or debris in the tracks where the wheels run. Clear and clean those first to see if the problem is solved.If not, check the quality of the springs. They should be the same length and stretch the same amount. On doors with automatic openers, the motors that control both sides of the door may be faulty. A replacement may be in order.
Loud Noises When Opening or Closing the Garage Door
Loud screeching, grinding or squealing noises coming from the garage door signifies a problem with dirt or debris in the track or lack of lubrication. Clean the entire track where the door wheels run without harsh cleaners to remove dirt and anything else that could get in the way of a smooth operation.Use oil specially designed for garage doors, or a standard hardware lubricant such as WD-40, on all the door tracks and hardware. Run the door up and down a few times to check that the problem is solved.
Garage Door Falls Too Quickly When Lowering It
A falling garage door can pose a great risk of injury to people who are opening or closing it. This problem is caused by broken cables or overly loose springs. With the door in the closed position, carefully examine all the apparatus to determine what the problem is. Do not replace springs or cables on your own; instead consult a professional garage door repair man. There is several safety hazards related to replacing garage door springs without the proper equipment or knowledge.
Remote Control Door Opener Fails to Work
After checking the batteries and switches to make sure the device is powered up, the garage door still might have problems opening or closing correctly. If none of the above solutions helps – checking cables and clearing the tracks – you may have to either replace the garage opener motor or sensors.
Posted in Houston